DanaCap P80

DanaCap is a sealing system developed to enhance the O-ring sealing properties in terms of wear, friction and stick-slip. The sealing system consists of an elastomeric O-ring and a PTFE cap. The seal is suitable for reciprocating applications.
Thanks to the PTFE cap, the O-ring is not in direct contact with the moving surface. The PTFE cap is energised by the O-ring and the PTFE. No stick-slip occurs in the hardware contact. This sealing system is used in standard O-ring grooves in accordance with ISO 9194 and AS4716.
The seal can be equipped with notches. These are tiny grooves in the side of the seal in radial direction to assist O-ring activation in case of persistent pressure pulsation with retraction. The piston seal family provides a sealing effect between the intermittently moving surface and the outside diameter of the seal. Please refer to our order guide for the Dana-Seals designations of seals, materials, notches, etc. Please refer to our installation guide for further installation details.

Extreme chemical resistance
Add Your Tooltip Text Here

Advantages:

Applications

Working conditions:

Frequently used - DanaFlon Material
Static and semi-dynamic applications   –200 to +260 °C
Basis material PTFE
DanaFlon 18
Filler Additives
Colour    Blue
Sealing against gas yes
Wide range of media yes
Lubricating media yes
Non-lubricating media yes
Food applications no
Conforms to food regulation  no
Extreme wear resistance  no
Extreme form stability and extrusion resistance no
Alternative solution - DanaFlon Material
Intensive movement - High pressure   –200 to +260 °C
Basis material PTFE
DanaFlon 31
Filler Carbon
Colour    Black
Extreme form stability and extrusion resistance (yes)
Lubricating media yes
Extreme wear resistance  (yes)
Wide range of media yes
Non-lubricating media yes
Food applications no
Conforms to food regulation  no

DanaCap P80

Technical details

Here you can see the technical details

Recommended finish for dynamic sealing surface *
  • Ra max (0.2 μm)
  • Rz max (1.25 μm)
  • Rp max (0.63 μm)
  • Tp = 50 - 70% at depth of p= 0.25 Rz
Series øA H9 øB h9 L G + 0,2 R E Diametral clearance O-Ring
max max. Series Cross sect.
P80 00 8 - 13,9 ø A - 2,9 1,45 2,40 0,4 0,13 000 1,78
01 14 - 24,9 ø A - 4,5 2,25 3,60 0,4 0,13 100 2,62
02 25 - 45,9 ø A - 6,2 3,10 4,80 0,6 0,15 200 3,53
03 46 - 124,9 ø A - 9,4 4,70 7,10 0,8 0,17 300 5,33
04 125 - 400,9 ø A - 12,2 6,10 9,50 0,8 0,25 400 7,00
06 8 - 13,9 ø A - 4,0 2,00 3,20 0,5 0,13 - 2,40
07 14 - 24,9 ø A - 5,0 2,50 4,00 1 0,15 - 3,00
08 25 - 45,9 ø A - 10,0 5,00 7,50 1 0,17 - 5,70
09 46 - 124,9 ø A - 15,0 7,50 11,00 1 0,25 - 8,40
10 8 - 13,9 ø A - 2,9 1,45 3,80 0,4 0,13 000 1,78
11 14 - 24,9 ø A - 4,5 2,25 4,65 0,4 0,13 100 2,62
12 25 - 45,9 ø A - 6,2 3,10 5,70 0,6 0,15 200 3,53
13 46 - 124,9 ø A - 9,4 4,70 8,50 0,8 0,17 300 5,33
14 125 - 400,9 ø A - 12,2 6,10 11,20 0,8 0,25 400 7,00
16 8 - 13,9 ø A - 4,0 2,00 4,60 0,5 0,13 - 2,40
17 14 - 24,9 ø A - 5,0 2,50 5,40 1 0,15 - 3,00
18 25 - 45,9 ø A - 10,0 5,00 9,30 1 0,17 - 5,70
19 46 - 124,9 ø A - 15,0 7,50 13,20 1 0,25 - 8,40
Order example - DanaCap for 30mm bore:

Delivery times

For special requests, please complete our Request form or call us on +45 4922 4400.

Engineering request form

Please fill in the form below and we would appreciate it if you attach eventual drawings of hardware or seals to clarify technical demands.